Separate indoor and outdoor tasks
A factory may use a 3-tonne truck at receiving, production lines and outdoor yards. List each route and task frequency. If the truck enters areas with hygiene or emission restrictions, its power source must meet the site's requirements.
Check aisle width with the actual pallet on the truck. An empty truck's turning ability does not establish whether it can work between racks. A material-flow plan helps identify crossings and difficult turns.
Technical specifications to check
| Model / equipment group | Nominal load capacity | Lift height | Energy source / battery |
|---|---|---|---|
| CPD30-XEY2H2-SI | 3 tonnes | 3,000 mm, reference configuration | Lithium 80 V / 406 Ah |
| CPCD30-A2G2(8) | 3 tonnes | 3,000 mm, reference configuration | Diesel; no traction battery |
Specifications are from ACE C&T's current catalogue and are reference configurations, not confirmation of depot stock. Permitted capacity at working height must follow the actual truck's load chart, load centre and attachment.
Prepare two comparable configurations
Lithium option
Specify the model, battery, charger, mast and attachments. For two shifts, provide charging breaks and workload per shift. Battery capacity on the label alone does not guarantee compatibility with every schedule.
Diesel option
Specify operating conditions, mast and tyres, and who manages fuel. Indoor use needs a separate environmental and safety assessment; refuelling convenience alone is not sufficient.
Both options must meet the same required capacity at working height and offer the same service scope. If attachments or hour limits differ, request comparable terms before comparing totals.
Confirm excess-hour and extra-shift charges early
Peak periods can mean longer running hours than originally planned. Contracts should define meter recording, included hours, excess-hour calculations and treatment of maintenance or repair downtime.
For a fleet, ask whether limits apply per truck or to the whole fleet; do not assume hours can be pooled. Record delivery meter readings and reconcile regularly to forecast costs before month-end.
Check lifting capability before choosing a 3-tonne truck
A nominal 3-tonne rating does not guarantee 3-tonne lifting in every position. Long loads, extended load centres and clamps may change the limit. Provide total pallet weight and the highest picking level for technical confirmation.
For container entry, provide door dimensions, lowered mast height, free lift and ramp arrangements. Check these configuration requirements before ordering rather than after the truck arrives.
Daily, monthly and yearly rental pricing
Rental rates depend on configuration, shifts, operating hours, term and delivery location. Request the same service scope when comparing total costs.
| Billing period | Rate / calculation method | Applicable conditions |
|---|---|---|
| Daily | Contact us to check availability | No daily rental package has been published; dividing monthly rent by 30 does not constitute a quotation. |
| Monthly | Service rates from VND 7,500,000 per truck/month; specific configurations quoted separately | Minimum 12-month contract. Applicable model, operating hours, VAT, delivery/collection and maintenance are confirmed in the quotation. |
| Yearly | 12 × monthly rate if configuration and rate are unchanged | Add agreed costs outside the rent; multi-year contracts are quoted separately. |
ACE C&T rental rates start from VND 7,500,000 per truck/month, with a minimum 12-month contract. This is the service starting rate; configurations and prices for the models in this article are confirmed separately in the quotation tailored to your needs. Operating hours, VAT, transport, maintenance and additional charges are set out in the quotation and contract. Track any refundable deposit separately from operating costs.
Technical support SLA and handover plan
Agree in writing on fault-reporting contacts, service hours, response times, site attendance and arrangements during downtime. Response time is different from repair completion time; record both so the warehouse can plan goods movements.
ACE C&T confirms the applicable SLA in the quotation or contract based on location, shifts and configuration. Speak with Mr. Lê Đình Lê — 0904.070.313 to agree on response arrangements and maintenance coverage for your factory.
QUOTATION FOR YOUR REQUIREMENTS
Compare 3-tonne electric and diesel rental quotations
Send your goods type, actual load, rack height, aisle width, doorway height, shifts and operating location for a configuration proposal. ACE C&T rents 100% new Hangcha forklifts nationwide.
Contact: Mr. Lê Đình Lê · ledinhle@live.com
Depot address: Tu Son, Bac Ninh. Please call ahead to arrange a visit and confirm the handover location.
References: ACE C&T configuration catalogue. Confirm specifications for the exact model and supplied configuration.