Illustration of a Hangcha sit-down forklift
Illustrative Hangcha product image. The supplied configuration is confirmed in the quotation.

How much does it cost to rent a Hangcha sit-down forklift per month in 2026?

ACE C&T publishes a service price starting from VND 7,500,000 per truck per month for contracts of at least 12 months. The rate for a sit-down truck must be confirmed for the exact electric or diesel type, capacity, mast and operating hours. There is currently no single fixed price for all sit-down forklifts.

For a figure suitable for budget approval, request a quotation that states the specific model and attachments instead of the generic description “Hangcha sit-down forklift”. VAT, transport and maintenance must be shown clearly in the same quotation.

Technical specifications to check

Reference configurations from the ACE C&T catalogue — not final priced configurations
Reference modelNominal load capacityReference lift heightBattery / power source
CPD25-XEY2HA-SI2.5 tonnes3000 mm80V/271Ah
CPD30-XEY2H2-SI3.0 tonnes3000 mm80V/406Ah
CPCD30-A2G2(8)3.0 tonnes3000 mmDiesel engine

These specifications are taken from ACE C&T's currently published catalogue. Before signing, verify the documents for the exact model, battery type and mast; rated capacity is not the lifting capacity at every height. The catalogue does not confirm vehicle availability or which model qualifies for the starting rate.

Three sit-down forklift groups to distinguish before requesting a price

Sit-down electric counterbalance forklift

Often considered for material flows inside warehouses. Battery, charger, door height, turning radius and floor conditions must be checked for the exact model. Assess actual travel time to select a suitable battery configuration.

Sit-down diesel counterbalance forklift

Check the work area, ventilation, yard surface and engine-use conditions. Do not substitute a diesel rental rate for an electric truck price when the warehouse process requires a different power source.

Sit-down reach truck

This option should be assessed separately for high-bay racking. Residual capacity at the highest level, pallet type and working aisle are important inputs. Do not assume a reach truck can replace a counterbalance truck at every stage.

Why do trucks with similar seats receive different quotations?

Two trucks that look similar may differ in collapsed mast height, free lift, residual capacity at working height or tyre type. These options affect whether the truck can pass through doors, stack on racks and handle the load. A lower rental rate is not economical if the truck cannot do the job.

If the same truck serves both an outdoor yard and an indoor warehouse, provide the full travel route, gradients, entrances and environmental requirements. Finalise the configuration for the entire operating route before comparing monthly rates.

How to request a quotation that can be compared fairly

Provide the material-flow layout, pallet dimensions, maximum weight, rack height, aisle width, number of trucks and expected operating hours. Ask the supplier to state that the trucks are 100% new and specify acceptance conditions, handover timing and accompanying documents.

When approving the proposal, compare rent over the full term, electricity or diesel, delivery and collection charges, and technical support. You can begin with the Hangcha product-line catalogue and then submit your requirements on the quotation page.

Daily, monthly and yearly rental pricing

The monthly rate is used to budget for contracts of at least 12 months. Compare quotations only after the configuration, operating hours and service scope have been aligned.

Rental pricing by period — quotation on request
Billing periodRate / calculation methodApplicable conditions
DailyContact us to check availabilityNo daily rental package has been published; dividing monthly rent by 30 does not constitute a quotation.
MonthlyService rates from VND 7,500,000 per truck/month; specific configurations quoted separatelyMinimum 12-month contract. Applicable model, operating hours, VAT, delivery/collection and maintenance are confirmed in the quotation.
Yearly12 × monthly rate if configuration and rate are unchangedAdd agreed costs outside the rent; multi-year contracts are quoted separately.

ACE C&T rental rates start from VND 7,500,000 per truck/month, with a minimum 12-month contract. This is the service starting rate; configurations and prices for the models in this article are confirmed separately in the quotation tailored to your needs. Operating hours, VAT, transport, maintenance and additional charges are set out in the quotation and contract. Track any refundable deposit separately from operating costs.

Technical support SLA and handover plan

Agree in writing on fault-reporting contacts, service hours, response times, site attendance and arrangements during downtime. Response time is different from repair completion time; record both so the warehouse can plan goods movements.

ACE C&T confirms the applicable SLA in the quotation or contract based on location, shifts and configuration. Speak with Mr. Lê Đình Lê — 0904.070.313 to agree on response arrangements and maintenance coverage for your factory.

Frequently asked questions

Are all Hangcha sit-down forklifts diesel trucks?

No. Sit-down operation is available across several product lines, including electric counterbalance trucks, diesel trucks and some reach trucks. State the full truck type in the quotation request.

Does sit-down forklift rental include an operator?

The published price does not confirm that an operator is included. If you need an operator, list this separately so availability and cost can be confirmed.

Does the VND 7,500,000 rate apply to every sit-down forklift?

No. This is the general starting price for the service; ACE C&T must separately confirm which model it applies to.

QUOTATION FOR YOUR REQUIREMENTS

Get a Hangcha quotation matched to your warehouse configuration

Send your goods type, actual load, rack height, aisle width, doorway height, shifts and operating location for a configuration proposal. ACE C&T rents 100% new Hangcha forklifts nationwide.

Contact: Mr. Lê Đình Lê · ledinhle@live.com
Depot address: Tu Son, Bac Ninh. Please call ahead to arrange a visit and confirm the handover location.

Call 0904.070.313Contact us on ZaloRequest a quotation

References: Hangcha lithium forklift catalogue. Confirm specifications for the exact model and supplied configuration.