
2026 price guide for renting 100% new Hangcha diesel forklifts: scope and conditions
The ACE C&T catalogue includes diesel forklift models from the 3-tonne group to higher capacities. Each model must be quoted for its configuration and operating conditions; there is currently no sufficiently confirmed model-specific rate. The service's starting price must not be understood as the default price for a 3-, 5- or 6-tonne diesel truck.
Ask the quotation and contract to confirm that the truck is 100% new. At handover, verify the model, chassis or serial number, truck condition and documents agreed with the supplier.
Technical specifications to check
| Reference model | Nominal load capacity | Reference lift height | Battery / power source |
|---|---|---|---|
| CPCD30-A2G2(8) | 3.0 tonnes | 3000 mm | Diesel engine |
| CPCD35-A2G2(8) | 3.5 tonnes | 3000 mm | Diesel engine |
| CPCD50-XRG77 | 5.0 tonnes | 3000 mm | Diesel engine |
| CPCD60-XRG77 | 6.0 tonnes | 3000 mm | Diesel engine |
These specifications are taken from ACE C&T's currently published catalogue. Before signing, verify the documents for the exact model, battery type and mast; rated capacity is not the lifting capacity at every height. The catalogue does not confirm vehicle availability or which model qualifies for the starting rate.
Four factors that change a diesel forklift rental budget
Capacity, load centre and mast
Heavy or long loads require capacity to be assessed at the correct load centre and working height. When a clamp is fitted, confirm the remaining capacity after installation. Choosing only by nominal capacity and ignoring these conditions may require a configuration change.
Operating hours and work environment
A warehouse that needs a truck continuously and one that unloads only a few batches each day have different duty intensities. State the floor surface, gradients, dust and travel route so the configuration, maintenance schedule and included operating hours can be agreed.
Fuel, delivery and collection
Track actual diesel use instead of applying one litres-per-hour figure to every truck. The quotation must also separate delivery, collection and loading or unloading charges for the specific location.
Budgeting for fuel without confusing tank capacity with consumption
Fuel-tank capacity is not hourly fuel consumption. For budgeting, use measured diesel consumption under comparable operating conditions or a rate agreed by both parties. Monthly fuel cost equals forecast litres multiplied by the fuel price applicable when used.
The budget should separate rent, diesel, labour, out-of-package charges and tax. If data is unavailable, mark fuel as an estimate and update it after a trial period; do not describe it as ACE C&T's committed cost.
Check the quotation and diesel forklift handover record
Record the mast, forks, tyres, attachments, hour meter at handover and maintenance schedule in the file. Confirm who tracks operating hours, who supplies consumables, the incident contact and any conditions for using a replacement truck.
A truck used in an enclosed area requires assessment of ventilation conditions and the factory's operating rules. See the diesel forklift rental service and provide a site layout to select the right solution.
Daily, monthly and yearly rental pricing
The monthly rate is used to budget for contracts of at least 12 months. Compare quotations only after the configuration, operating hours and service scope have been aligned.
| Billing period | Rate / calculation method | Applicable conditions |
|---|---|---|
| Daily | Contact us to check availability | No daily rental package has been published; dividing monthly rent by 30 does not constitute a quotation. |
| Monthly | Service rates from VND 7,500,000 per truck/month; specific configurations quoted separately | Minimum 12-month contract. Applicable model, operating hours, VAT, delivery/collection and maintenance are confirmed in the quotation. |
| Yearly | 12 × monthly rate if configuration and rate are unchanged | Add agreed costs outside the rent; multi-year contracts are quoted separately. |
ACE C&T rental rates start from VND 7,500,000 per truck/month, with a minimum 12-month contract. This is the service starting rate; configurations and prices for the models in this article are confirmed separately in the quotation tailored to your needs. Operating hours, VAT, transport, maintenance and additional charges are set out in the quotation and contract. Track any refundable deposit separately from operating costs.
Technical support SLA and handover plan
Agree in writing on fault-reporting contacts, service hours, response times, site attendance and arrangements during downtime. Response time is different from repair completion time; record both so the warehouse can plan goods movements.
ACE C&T confirms the applicable SLA in the quotation or contract based on location, shifts and configuration. Speak with Mr. Lê Đình Lê — 0904.070.313 to agree on response arrangements and maintenance coverage for your factory.
Frequently asked questions
Does the Hangcha diesel forklift rental price include fuel?
There is no confirmation that the published price includes fuel. Ask the quotation to state who pays for diesel and the fuel conditions at handover and return.
How much does it cost to rent a 5-tonne diesel forklift in 2026?
The price for a 5-tonne truck must be confirmed by model, mast, attachments, operating hours and location. Do not infer the 5-tonne price from the general starting rate.
Is all maintenance for a diesel forklift free of charge?
The scope of maintenance, consumables, tyres and exclusions must be stated in the quotation or contract. Do not assume every cost is waived.
QUOTATION FOR YOUR REQUIREMENTS
Get a Hangcha quotation matched to your warehouse configuration
Send your goods type, actual load, rack height, aisle width, doorway height, shifts and operating location for a configuration proposal. ACE C&T rents 100% new Hangcha forklifts nationwide.
Contact: Mr. Lê Đình Lê · ledinhle@live.com
Depot address: Tu Son, Bac Ninh. Please call ahead to arrange a visit and confirm the handover location.
Call 0904 070 313